Keramik-Zentrierstift (TC)

Schweißmutter-Zentrierstifte vom Typ TC sind die Eigenproduktion von Topteknik.

Material: Keramik (ZrO2 ρ =6,1 g/cm3)

Bestellbeispiel: TC M5-5.8S | TC M5-6.2R | TC M5-6.8K

Typ Nein (TC…)	Blechloch Ø	Formen der Zentrierstiftspitze
		S		R		K
		L	Ø D	L	Ø D	L	Ø D
M5-5.2	5.4	29.8	10.0	27.3	10.0	29.8	10.0
M5-5.4	5.6	29.7	10.0	27.2	10.0	29.7	10.0
M5-5.6	5.8	29.6	10.0	27.1	10.0	29.6	10.0
M5-5.8	6.0	29.5	10.0	27.0	10.0	29.5	10.0
M5-6.0	6.2	29.5	10.0	26.9	10.0	29.5	10.0
M5-6.2	6.4	29.3	10.0	26.8	10.0	29.3	10.0
M5-6.4	6.6	29.4	10.0	26.7	10.0	29.4	10.0
M5-6.6	6.8	29.2	10.0	26.7	10.0	29.2	10.0
M5-6.8	7.0	29.1	10.0	26.6	10.0	29.1	10.0
M5-7.0	7.2	29.0	10.0	26.5	10.0	29.0	10.0
M5-7.2	7.4	32.0	12.0	26.4	12.0	32.0	12.0
M5-7.4	7.6	31.9	12.0	26.2	12.0	31.9	12.0
M5-7.6	7.8	31.8	12.0	26.1	12.0	31.8	12.0
M5-7.8	8.0	31.7	12.0	26.0	12.0	31.7	12.0
M5-8.0	8.2	31.6	12.0	26.0	12.0	31.6	12.0

Bestellbeispiel: TCM6-6.8R, TCM6-7.4S, TCM6-7.8K

Typ Nein (TC…)	Blechloch Ø	Formen der Zentrierstiftspitze
		S		R		K
		L	Ø D	L	Ø D	L	Ø D
M6-6.0	6.2	30.7	10.0	27.2	10.0	30.7	10.0
M6-6.2	6.4	30.6	10.0	27.1	10.0	30.6	10.0
M6-6.4	6.6	30.5	10.0	27.0	10.0	30.5	10.0
M6-6.6	6.8	30.4	10.0	26.9	10.0	30.4	10.0
M6-6.8	7.0	30.3	10.0	26.8	10.0	30.3	10.0
M6-7.0	7.2	30.2	10.0	26.8	10.0	30.2	10.0
M6-7.2	7.4	32.4	12.0	28.5	12.0	32.4	12.0
M6-7.4	7.6	32.3	12.0	28.4	12.0	32.3	12.0
M6-7.6	7.8	32.2	12.0	28.3	12.0	32.2	12.0
M6-7.8	8.0	32.1	12.0	28.2	12.0	32.1	12.0
M6-8.0	8.2	32.0	12.0	28.1	12.0	32.0	12.0
M6-8.2	8.4	31.9	12.0	28.0	12.0	31.9	12.0
M6-8.4	8.6	31.8	12.0	27.9	12.0	31.8	12.0
M6-8.6	8.8	31.7	12.0	27.8	12.0	31.7	12.0
M6-8.8	9.0	31.6	12.0	27.7	12.0	31.6	12.0
M6-9.0	9.2	31.5	12.0	24.7	12.0	31.5	12.0

Bestellbeispiel: TCM8-9.4S, TCM8-9.8R, TCM8-10.4K

Typ Nein (TC…)	Blechloch Ø	Formen der Zentrierstiftspitze
		S			R			K
		L	Ø D	Ø D1	L	Ø D	Ø D1	L	Ø D	Ø D1
M8-8.4	8.6	34.0	12.0	5.5	28.4	12.0	5.5	34.0	12.0	5.5
M8-8.6	8.8	33.9	12.0	5.5	28.2	12.0	5.5	33.9	12.0	5.5
M8-8.8	9.0	33.8	12.0	5.5	28.0	12.0	5.5	33.8	12.0	5.5
M8-9.0	9.2	33.7	12.0	5.5	27.8	12.0	5.5	33.7	12.0	5.5
M8-9.2	9.4	33.6	12.0	5.5	27.6	12.0	5.5	33.6	12.0	5.5
M8-9.4	9.6	33.5	12.0	5.5	27.5	12.0	5.5	33.5	12.0	5.5
M8-9.6	9.8	34.2	13.0	5.5	29.2	13.0	5.5	34.2	13.0	5.5
M8-9.8	10.0	34.1	13.0	5.5	29.1	13.0	5.5	34.0	13.0	5.5
M8-10.0	10.2	34.0	13.0	5.5	28.9	13.0	5.5	33.9	13.0	5.5
M8-10.2	10.4	33.9	13.0	5.5	28.7	13.0	5.5	33.7	13.0	5.5
M8-10.4	10.6	33.9	13.0	5.5	28.6	13.0	5.5	33.5	13.0	5.5
M8-10.4	10.8	34.0	16.0	8.5	29.9	16.0	8.5	34.0	16.0	8.5
M8-10.8	11.0	33.8	16.0	8.5	30.1	16.0	8.5	33.8	16.0	8.5
M8-11.0	11.2	33.7	16.0	8.5	30.3	16.0	8.5	33.7	16.0	8.5
M8-11.2	11.4	33.6	16.0	8.5	30.5	16.0	8.5	33.6	16.0	8.5
M8-11.4	11.6	33.5	16.0	8.5	30.3	16.0	8.5	33.5	16.0	8.5

M10

Bestellbeispiel: TCM10-10.8S, TCM10-11.4R, TCM10-11.8K

Typ Nein (TC…)	Blechloch Ø	Formen der Zentrierstiftspitze
		S		R		K
		L	Ø D	L	Ø D	L	Ø D
M10-10.8	11.0	36.4	16.0	31.8	16.0	36.4	16.0
M10-11.0	11.2	36.3	16.0	31.7	16.0	36.3	16.0
M10-11.2	11.4	36.2	16.0	31.6	16.0	36.2	16.0
M10-11.4	11.6	36.0	16.0	31.5	16.0	36.0	16.0
M10-11.6	11.8	35.9	16.0	31.4	16.0	35.9	16.0
M10-11.8	12.0	35.8	16.0	31.4	16.0	35.8	16.0
M10-12.0	12.2	35.7	16.0	31.3	16.0	35.7	16.0
M10-12.2	12.4	35.6	16.0	31.2	16.0	35.6	16.0
M10-12.4	12.6	35.5	16.0	31.1	16.0	35.5	16.0
M10-12.6	12.8	35.4	16.0	31.1	16.0	35.4	16.0
M10-12.8	13.0	35.3	16.0	31.0	16.0	35.3	16.0
M10-13.0	13.2	35.2	16.0	30.9	16.0	35.2	16.0
M10-13.2	13.4	35.2	16.0	30.8	16.0	35.2	16.0
M10-13.4	13.6	35.0	16.0	30.7	16.0	35.0	16.0
M10-13.6	13.8	34.9	16.0	30.6	16.0	34.9	16.0

M12

Bestellbeispiel: TCM12-12.6S, TCM12-12.8R, TCM12-13.6K

Typ Nein (TC…)	Blechloch Ø	Formen der Zentrierstiftspitze
		S		R		K
		L	Ø D	L	Ø D	L	Ø D
M12-12.4	12.6	38.2	16.0	32.0	16.0	38.2	16.0
M12-12.6	12.8	38.1	16.0	31.9	16.0	38.1	16.0
M12-12.8	13.0	38.0	16.0	31.8	16.0	38.0	16.0
M12-13.0	13.2	38.9	16.0	31.7	16.0	38.9	16.0
M12-13.2	13.4	38.9	16.0	31.6	16.0	38.9	16.0
M12-13.4	13.6	38.8	16.0	31.5	16.0	38.8	16.0
M12-13.6	13.8	38.7	16.0	31.4	16.0	38.7	16.0
M12-13.8	14.0	35.4	16.0	29.3	16.0	35.4	16.0
M12-13.8	14.2	38.8	18.0	33.0	18.0	38.8	18.0
M12-14.2	14.4	38.7	18.0	32.9	18.0	38.7	18.0
M12-14.4	14.6	38.6	18.0	32.8	18.0	38.6	18.0
M12-14.6	14.8	38.5	18.0	32.7	18.0	38.5	18.0
M12-14.8	15.0	38.4	18.0	32.6	18.0	38.4	18.0
M12-15.0	15.2	38.3	18.0	32.5	18.0	38.3	18.0
M12-15.2	15.4	38.2	18.0	32.4	18.0	38.2	18.0
M12-15.4	15.6	38.1	18.0	32.3	18.0	38.1	18.0
M12-15.6	15.8	34.9	18.0	30.4	18.0	34.9	18.0
M12-15.8	16.0	34.7	18.0	30.3	18.0	34.7	18.0
M12-16.0	16.2	34.6	18.0	30.2	18.0	34.6	18.0

Porosität, spezifisches Gewicht und Bruch/Abriebfestigkeit

Der Zusammenhang zwischen Porosität, spezifischem Gewicht und Bruch-/Abriebfestigkeit bei Maschinenteilen aus Zirkonoxid (Zirkonia)

Porosität ↑

Spezifisches Gewicht ↓

Bruch-/Abriebfestigkeit ↓

Porosität ↓

Spezifisches Gewicht ↑

Bruch-/Abriebfestigkeit ↑

Dichte ρ ≥ 6,03 g/cm³ in Toptechnics (TC..) Keramikstiften